This tutorial was written on Friday, May 25th 2012 by Mystery Designs. It was written in PSP X2 and assumes a good, working knowledge of the program. Any similarity to other tutorials is purely coincidental and not done intentionally. Please do not copy or claim the tutorial as your own. If you wish to do so, please link to my blog should groups or forums use it in challenges, and please leave me a comment with a link to where it is being used. Thanks :)
**Supplies Needed**
Tube of choice. I'm using a fabulous tube by Xeracx and you can purchase it over at his store here
Scrapkit of choice. I'm using a fab PTU kit by Karra's Kreative Korner called “Friends Forever : Jackie” You can purchase it over at the Artistic Reality Talent store here
Mask of choice. I'm using a freebie by Designs by Vaybs (Mask 40) which you can collect here
Font of choice
Please take a moment to leave some love when you download from these wonderful designers <3 Thanks x
**Plugins**
None
Ready? Lets begin.....
Open up your tube
Press shift+d to duplicate
Close the original
Open up a new image – 650 x 650 pixels
Open up “KK_film strip” from the kit
Copy – Paste – As New Layer and rename “Film1”
Image – Free Rotate – Left – 15 Degrees
Arrange it toward the top of your tag
Layers – Duplicate and rename “Film2”
Image – Flip
Arrange so it overlaps the previous film strip slightly on the left-hand side
Highlight your “Film1” layer
Grab your Magic Wand tool with these settings :
Select inside all the film cells
Selections – Modify – Expand – 4 Pixels
Layers – New Raster Layer and rename “Film1inside”
Open up “Kkpaper5” from the kit
Copy – Paste – Into Selection
Selections – None
Layers – Arrange – Move Down
Highlight your “Film2” layer
Grab your Magic Wand tool again
Select inside all the film cells
Selections – Modify – Expand – 4 Pixels
Layers – New Raster Layer and rename “Film2inside”
Grab “Kkpaper5” again
Copy – Paste – Into Selection
Selections – None
Layers – Arrange – Move Down
Highlight your “Film1” layer again
Grab your Magic Wand tool and select the first cell on the left
Selections – Modify – Expand – 4 Pixels
Copy – Paste your tube as new layer and rename “Tube1”
Arrange over the selection until you are happy
Selections – Invert and hit delete
Selections – Select All
Image – Crop To Selection
Layers – Arrange – Move Down
Change the Blend Mode of this layer to “Luminance Legacy” and lower the opacity to around 76%
Highlight your “Film1” layer
Grab your Magic Wand tool and select the middle cell
Selections – Modify – Expand – 4 Pixels
Copy – Paste your tube as new layer and rename “Tube2”
Arrange over the selection
Selections – Invert and hit delete
Selections – Select All
Image – Crop To Selection
Layers – Arrange – Move Down
Change the Blend Mode of this layer to “Luminance Legacy” and lower the opacity to around 91%
Highlight your “Film1” layer
Grab your Magic Wand tool and select the end cell on the right
Selections – Modify – Expand – 4 Pixels
Copy – Paste your tube as new layer and rename “Tube3”
Arrange over the selection
Selections – Invert and hit delete
Selections – Select All
Image – Crop To Selection
Layers – Arrange – Move Down
Change the Blend Mode of this layer to “Luminance Legacy” and lower the opacity to around 68%
Highlight your “Film2” layer
Grab your Magic Wand tool and select the first cell on the left
Selections – Modify – Expand – 4 Pixels
Copy – Paste your tube as new layer and rename “Tube4”
Arrange over the selection
Selections – Invert and hit delete
Selections – Select All
Image – Crop To Selection
Layers – Arrange – Move Down
Change the Blend Mode of this layer to “Luminance Legacy” and lower the opacity to around 78%
Highlight your “Film2” layer
Grab your Magic Wand tool and select the middle cell
Selections – Modify – Expand – 4 Pixels
Copy – Paste your tube as new layer and rename “Tube5”
Arrange over the selection
Selections – Invert and hit delete
Selections – Select All
Image – Crop To Selection
Layers – Arrange – Move Down
Change the Blend Mode of this layer to “Luminance Legacy” and lower the opacity to around 76%
Highlight your “Film2” layer
Grab your Magic Wand tool and select the end cell on the right
Selections – Modify – Expand – 4 Pixels
Copy – Paste your tube as new layer and rename “Tube6”
Arrange over the selection
Selections – Invert and hit delete
Selections – Select All
Image – Crop To Selection
Layers – Arrange – Move Down
Change the Blend Mode of this layer to “Luminance Legacy” and lower the opacity to around 85%
Highlight your “Film1inside” layer
Selections – Select All – Float – Defloat
Open up “KK_sparkles” from the kit
Copy – Paste – As New Layer and rename “Sparkles1”
Arrange them over the film cells until you are happy
Selections – Invert and hit delete
Selections – None
Move this layer up so that it is just below your “Film1” layer in your Layer Palette
Highlight your “Film2inside” layer
Selections – Select All – Float - Defloat
Grab “KK_sparkles” again from the kit
Press shift +d to duplicate it and close the original
Image – Flip
Copy – Paste over onto your tag as a New Layer and rename “Sparkles2”
Arrange over the selected area
Selections – Invert and hit delete
Selections – None
Move this layer up so that it is below your “Film2” layer in your Layer Palette
Highlight your “Tube3” layer
Open up “KK_kiss” from the kit
Copy – Paste – As New Layer and rename “Kiss”
Image – Resize – 50%
Arrange it over in the top middle cell
Change the Blend Mode to “Hard Light” and lower the opacity to around 46
Highlight “Film1” layer and add a drop shadow
Highlight “Film2” layer and add a drop shadow
Open up “KK_bow1” from the kit
Copy – Paste – As New Layer and rename “Bow1”
Image – Resize – 50%
Arrange over to the left where the two film strip's overlap
Add a drop shadow
Open up “KK_lable1” from the kit
Copy – Paste – As New Layer and rename “Label1”
Image – Resize – 50%
Image – Free Rotate – Left 15 Degrees
Arrange over towards the right of your tag along the bottom edge of the top film strip
Add a drop shadow
Open up “KK_Lable2” from the kit
Copy – Paste – As New Layer and rename “Label2”
Image – Resize – 50%
Image – Free Rotate – Right 15 Degrees
Arrange over towards the right of your tag along the top edge of the bottom film strip
Add a drop shadow
Open up “KK_ribbon” from the kit
Copy – Paste – As New Layer and rename “Ribbon”
Image – Resize – 50%
Arrange over the top edge of the classy label (“Label1”)
Add a drop shadow
Open up “KK_crystal curtain” from the kit
Copy – Paste – As New Layer and rename “Curtain”
Arrange over to the right of your tag (see mine for guidance)
Once happy with the placement move this layer down in your Layer Palette until it is below your “Film1inside” layer
Add a drop shadow
Highlight your “Ribbon” layer
Open up “KK_flower2” from the kit
Copy – Paste – As New Layer and rename “Flower1”
Image – Resize – 50%
Arrange along the bottom-right of your tag
Add a drop shadow
Open up “KK_flower1” from the kit
Copy – Paste – As New Layer and rename “Flower2”
Image – Resize – 50%
Arrange along the bottom-right of your tag so it overlaps the previous flower slightly
Add a drop shadow
Open up “KK_lipstick” from the kit
Copy – Paste – As New Layer and rename “Lipstick”
Image – Resize – 35%
Arrange over by the two flowers that have just been placed along the bottom-right of your tag
Add a drop shadow
Open up “KK_diamond” from the kit
Copy – Paste – As New Layer and rename “Diamond1”
Image – Resize – 20%
Arrange along the bottom-right of your tag in front of your flowers
Add a drop shadow
Layers – Duplicate and rename “Diamond2”
Move over to the right slightly so that it overlaps diamond 1
Layers – Duplicate and rename “Diamond3”
Move over to the right slightly so that it overlaps diamond 2
Copy – Paste your tube As New Layer and rename “MainTube”
Add a drop shadow
Highlight your “Raster1” layer
Change your foreground and background to two colours that compliment your tag. I am using #4899de and #592170
Change your background to gradient with these settings :
Grab your Floodfill Tool and fill your layer with the new gradient
Layers – Load/Save Mask – Load From Disk and choose “DBV Mask40” with these settings :
**If you would like to resize your tag, now is the time to do so**
Add your name and all copyrights.
Save your finished tag and you’re done!
Here is another example using a different artist :)
No comments:
Post a Comment